New Product Launch | Aijin Bio R-Series Pipette Tips, Available in Push-Down Base Boxes and Stackable Boxes
NEW Product
suction head pressing bottom box and corresponding matching box
In the experimental operation, the tip is not only the basic consumables, but also to ensure the pipetting accuracy and experimental smooth progress of the important link.In order to further improve the experimental convenience and consumables management efficiency, Aizin Bio in the R model tip product line introduced a new packaging form-pressing the bottom box and the corresponding matching box.
The new product in the design highlights the "one-handed opening and closing, stable stacking, rapid replenishment, reduce plastic use" and other features,From the operation convenience, storage rationality and resource utilization of the three aspects of optimization, for the# experimental supplies of standardized management and green laboratory construction provides a new solution.
PART01 Press Bottom Boxed Lifting 
Operation Convenience
Aizin R suction head pressing bottom box, the design focuses on simplifying operation and stabilizing structure.
With push-on locks, durable hinges and stackable structure,is not only convenient for one-handed opening and closing, but also makes storage and handling more efficient and orderly.
#1 push type lock buckle design, one hand can open
the 
, the traditional suction head box mostly adopts a two-hand open side buckle design, while Aizin Bio R suction head pressing bottom box uses a pressing lock structure-the experimenter only needs to place his thumb in the lock position.
Gently press, the lid can be bounced open, and the lid opening operation can be completed with one hand, which not only optimizes the convenience of the experimental process, but also improves the overall operation efficiency, especially suitable for batch processing scenarios of multi-channel pipettes.
#2 safety hinge, solid and durable
The box cover and the box body are connected by a solid hinge, using a 180 ° hinge design, the box cover can maintain a stable open state,
Fundamentally reduce the cover separation or fall of the additional operating steps, but also reduce the portable cover, the combination of falling caused by the suction head scattered risk.#3 Stable stacking, space
-saving 
to press the bottom box top and bottom with the fit of the card slot structure, can achieve a stable stack, easy to multi-layer storage, so as to improve the experimental table, ultra-clean table or storage rack space utilization, so that consumables management more orderly. 
PART02 pressing bottom box stacking convenient operation and green practice
Aizin R suction head pressing bottom box stacking design pays more attention to modularity and economy.
the frame structure, rapid replenishment of the tip and multi-layer configuration, so that it can significantly reduce the use of plastic at the same time, but also to meet the laboratory for space utilization and efficient replenishment needs.
#1 Stacked design space utilization and environmental protection are equally
important 
The stacked box eliminates the traditional bottom cover and adopts a frame structure, and the multi-layer modules can be tightly stacked.
in storage and transportation can reduce at least 60% of the volume requirements, thereby reducing storage pressure.
At the same time, because less plastic packaging is used, the plastic waste generated by a single tip is also greatly reduced, which is more in line with the construction concept of modern green laboratory.
#2 Quick refill, shorten replacement time
stacked boxed suction head replenishment process is very simple! There is no need to remove the cover, just align the stacked box with the empty box of the suction head below, and press lightly to complete the supplement.
The whole process takes only a few seconds, which helps to save the time of replacing consumables and reduce the risk of contamination that may occur during manual operation, thus ensuring the cleanliness of the experimental environment.
#3 multi-layer module, flexible choice
the stacked box provides 8-layer or 10-layer independent suction head modules according to different specifications, which is not only suitable for high-throughput laboratories to supplement a large number of suction heads at one time, but also can meet the flexible configuration and storage requirements of conventional laboratories.
PART03 Select Aizin Select Quality
aizin Bio is certified by ISO13485 and CE state-level high-tech enterprise,
relying on 26000 ㎡ intelligent production base and 5500 ㎡ dust-free workshop, it has independently developed and produced more than 900 kinds of experimental consumables and has continuously provided services for global scientific research for 16 years.
Aizin Creatures R suction head using precision production technology and biocompatible materials, it is suitable for cell culture, genomics and other research fields!
A variety of specifications are available, including 20 μL, 200 μL, 300 μL, 1000 μL, 1200 μL and 5000 μL.
at the same time, the suction head also provides a wealth of packaging, covering bags, boxed, pressed bottom box, stacked boxed and double stacked boxed, hoping to meet your different scenarios in the use of demand.
